Diagram 31/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Brake lamp switch, Accelerator pedal position sensor, Engine control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F - Brake lamp switch Locations

G79 - Accelerator pedal position sensor Locations

J623 - Engine control module Control Modules in Front Part Of Vehicle

T4k - 4-pin connector

T6ag - 6-pin connector

T17e - 17-pin connector, red Overview Of Connector Stations

T17f - 17-pin connector, brown Overview Of Connector Stations

T17r - 17-pin connector, white Overview Of Connector Stations

T46s - 46-pin connector Overview Of Connector Stations

(B335) - Connection 1 (54) (in main wiring harness)

(B398) - Comfort system CAN bus high connection 2 (in main wiring harness)

(B407) - Comfort system CAN bus low connection 2 (in main wiring harness)

(B537) - Connection 28 (in main wiring harness)

* - Refer to applicable engine wiring diagram

*2 - Omitted as a running change

Previous Diagram 31/2 (Tracks 1-14)