Engine, Securing to Assembly Stand

Engine, Securing on Assembly Stand

Special tools, testers and auxiliary items required

• Engine Sling (2024 A)

• Shop Crane -Load Cap=700-1200 kg (VAS 6100)

• Engine and Transmission Holder (VAS 6095)

• Counter Hold Tool (10 - 201)

Procedure






- Insert (10 - 201) to loosen the bolts.

The outer surface of the bearing flange at the drive plate could be damaged.

• Use a multipoint socket wrench with a shaft at least 40 mm long to loosen and tighten the drive plate bolts.

- Remove the bolts and remove the drive plate.

Loose engine support bridge components could cause an accident.

• Secure the mounting hooks and pins on the engine support bridge using securing pins - arrows -.

- Hook (2024 A) to the engine and to (VAS 6100).






• To be aligned to the center of gravity of the engine assembly, the hole rails of the lifting hook must be inserted as shown in the illustration.

- Secure the engine on the (VAS 6095) during assembly work.