Drive Plate With Anti-Friction Bearing

Drive Plate with Anti-Friction Bearing

- Remove the drive plate from the compressor shaft. Refer to => [ A/C Compressor Drive Plate ] A/C Compressor Drive Plate.

- Remove the circlip - A -.






- Remove the drive plate - B -.

• Replace circlip - A -.

• Clean the A/C compressor flange before sliding on drive plate.

• When installing circlip - A -, note that it cannot be bent open more than is necessary for installation.

• Insert circlip - A - on correct side, the side with beveled insertion edge - C - faces away from A/C compressor (install flat side facing compressor).