Rear Side Window

Rear Side Window

Removing






- Remove rear side trim..

- Remove the side window mount. Refer to => [ Side Window Mount ] Side Window Mount.

- Lower the window far enough so that the nuts inside the inner side panel are visible and then remove them - 1 through 3 -.

- Tilt the side window - 4 - into the passenger compartment - arrow A -, until the threaded pin on the side window bracket disengages from the window regulator.

- Move the side window to the rear and out of the opening in the body - arrow B -.

Installation

• Tightening specifications, refer to => [ Rear Side Window Overview ] Rear Side Window Overview.

• Adjustment dimensions, gap dimensions, refer to => [ Rear Side Window, Adjustment and Gap Dimensions ] Rear Side Window, Adjustment and Gap Dimensions.

Install in reverse order of removal. Note the following:

- Install the side window mount. Refer to => [ Side Window Mount ] Side Window Mount.

- Adjust the side window. Refer to => [ Rear Side Window, Adjusting ] Rear Side Window, Adjusting.