Windshield Wiper System Overview

Windshield Wiper System Overview

Observe notes on contact corrosion. Refer to=> [ Contact Corrosion ] Service Precautions.






1 Bolt

2 Windshield Wiper Motor

• With the wiper motor control module (J400)

• Removing and installing, refer to => [ Windshield Wiper Motor with Control Module (J400) ] Service and Repair.

3 Bolt

4 Nut

• 17 Nm

5 Cap

6 Windshield Wiper Arm, Passenger Side

• Different lengths. Refer to Electronic Parts Catalog (ETKA).

• Removing and installing, refer to => [ Wiper Arm ] Service and Repair.

• Adjusting, refer to => [ Wiper Arms, Adjusting ] Adjustments.

7 Windshield Wiper Blade, Passenger Side

• Different lengths. Refer to Electronic Parts Catalog (ETKA).

• Replacing, refer to => [ Wiper Blades, Replacing ] Service and Repair.

8 Windshield Wiper Blade, Driver Side

• Different lengths. Refer to Electronic Parts Catalog (ETKA)..

• Replacing, refer to => [ Wiper Blades, Replacing ] Service and Repair.

9 Windshield Wiper Arm, Driver Side

• Different lengths. Refer to Electronic Parts Catalog (ETKA).

• Removing and installing, refer to => [ Wiper Arm ] Service and Repair.

• Adjusting, refer to => [ Wiper Arms, Adjusting ] Adjustments.

10 Cap

11 Nut

• 17 Nm

12 Bolt

13 Water Drain Channel

Windshield Wiper Motor, Tightening Specification and Sequence





- Tighten the bolts - 1, 2 and 3 - in sequence in 2 stages as follows:

- Install by hand until snug.

- Tighten to 8 Nm.