Entry Assistance Release Cable A, Adjusting

Entry Assistance Release Cable A, Adjusting

The following conditions must be met to adjust the "entry assistance" release cable:

• The upholstery must be removed from the seat and backrest and they must be bolted to each other.

• To adjust the entry assistance function, the backrest must be positioned at the front stop.

• The entry assistance release cable B must be engaged at the backrest and on the lower section of the seat.

Checking and Correcting






- Press the entry assistance lever - 4 - in the direction of the - arrow - as far as the stop.

1 Backrest
2 Bolts
3 Tab
5 Backrest frame

- Release the tabs - 3 - and - 5 - - arrows A - with a screwdriver while pushing the lock - 2 - down - arrow B - at the same time.






- To adjust, turn the upper part - 4 - and the lower part - 1 - contrary to each other.

- Adjust the cable so it is free of play and tension.

- Make sure the cables work after adjusting them.

- If it does not release or only releases partially, check the release cable routing or repeat the adjustment.