Rear Brakes Guide Pins and Protective Caps, Replacing

Rear Brakes Guide Pins and Protective Caps, Replacing

If protective caps or guide pins are damaged, install repair kit. Use grease packet supplied to lubricate guide pins.

Removing

- Remove the bolts - 1 - on the brake caliper.






- Remove the brake caliper.

• Do not let the brake caliper hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.

- Remove the protective cap - 9 - from the nut on the brake carrier.






- Remove the guide pins - 8 - from the brake carrier.

- Remove the protective cap from the guide pin.

Installing

- Grease the guide pin before inserting.

- Slide the protective cap over the groove on the guide pin.

- Slide the guide pin - 8 - with the protective cap - 9 - through the brake carrier.






- Press the protective cap over the groove on the brake carrier.

- Insert the brake caliper.

- Install the bolts - 1 - and tighten them.