Diagram 17/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


All wheel drive control module, Suspension/instrument cluster CAN bus high connection 2 (in main wiring harness), Suspension/instrument cluster CAN bus low connection 2 (in main wiring harness)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J492 - All wheel drive control module Control Modules in rear part of vehicle, overview

J532 - Voltage stabilizer Control Modules in rear part of vehicle, overview

ST2 - Fuse panel 2

ST4 - Fuse panel 4

SF9 - Fuse 9 (on fuse panel F) Overview of Fuses

SF12 - Fuse 12 (on fuse panel F) Overview of Fuses

T12aa - 12-pin connector Voltage Stabilizer -J532-

T17f - 17-pin connector, brown Overview Of Connector Stations

T46s - 46-pin connector Overview Of Connector Stations

T47b - 47-pin connector Locations

(51) - Ground connection in luggage compartment, right Locations

(B273) - Positive connection (15) (in main wiring harness)

(B673) - Suspension/instrument cluster CAN bus high connection 2 (in main wiring harness)

(B677) - Suspension/instrument cluster CAN bus low connection 2 (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Only for vehicles with Stop/Start system

Next Diagram 17/3 (Tracks 15-28)