Alarm Horn: Service and Repair

Alarm Horn

Removing





Vehicles through 05.08

- Unclip the plenum chamber covers - 1 - and - 2 - and remove them.

• Ignore - item 3 - and the - arrow -.

Vehicles from 06.08





- Remove the bolts - 3 -.

- Remove the clips - 2 - from the mounts and remove the plenum chamber cover- 1 -.

All Vehicles





- Remove the nut - 3 -.

- Disconnect the electrical connector - 1 -.

- Remove the alarm horn (H12) - item 2 - upward.

Installing

• Tightening specification => [ Ultrasonic Interior Monitoring Assembly Overview ] Ultrasonic Interior Monitoring Assembly Overview.

Install in reverse order of removal, observing the following:

- Engage retaining tab in opening on bracket.