RS5

Rearview Camera System Control Module (J772)

The rearview camera system control module is located behind the luggage compartment right side trim.

- Turn off all electrical consumers.

- Remove the key.

- If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault-Finding" routine in the Vehicle diagnostic tester.

Removing

- Open right luggage compartment storage bin.

The rearview camera system control module - 2 - is attached to the rear bracket - 1 -.






To remove it, the bracket - 1 - must first be removed.

- Remove the screws - arrows - and nuts - 3 -.

- Remove the bracket - 1 - from the storage compartment and disconnect the connectors from the modules.






- Remove the bolts - arrows - on the rearview camera system control module - 2 - and remove it from the bracket - 1 -.

Installing

- Perform the installation in reverse order.

- Perform a calibration.

Tightening specifications, refer to => [ Rearview Camera System Overview ] Rearview Camera System Overview.