General Information

General Information

After performing service work on the vehicle, it may be necessary to calibrate the rearview camera system. In detail, this is the case after:

• Rear View Camera (R189) , removing and installing

• Rear View Camera System Control Module (J772) , removing and installing

• Collision repairs on rear lid

• Axle alignment

• Rear axle repairs

Calibration Requirements

• The camera lens must be clean.

• The vehicle must be on a secure, level surface.

• There must be plenty of open space around the vehicle.

• The parking brake must be pulled into position.

• The steering wheel must be in the 0 position and the wheels must be straight.

• All doors and the rear lid must be closed.

• No one should be in the vehicle.

• The vehicle must not be loaded (curb weight).

• Before each calibration: Switch ignition on.