Parking Aid Control Module, Vehicles Without Trailer Hitch

Parking Aid Control module, Vehicles without Trailer Hitch

Removing

- If the control module was replaced, select the Replace function for the respective control module in Guided Fault Finding or Guided Functions.

- Select the function or path.






- Follow the instructions on the Vehicle Diagnosis Tester display.

- Open the right luggage compartment side trim cover.





- Open the clip - 2 - and remove the park assist control module (J446) - 1 - from the frame.

- Disconnect electrical connectors - 3 through 5 -.

Installing

Install in reverse order.