Sun Shade: Service and Repair

Sun Shade






1 Sun Shade

• Do not operate the sun shade when it is removed or it will be damaged and will have to be replaced.

• The glass panel is removed.

• The wind deflector is removed.

- Close the sun shade completely toward the rear.

- Remove the threaded connection on the retracting spring.

Let the retracting spring retract into the brake slowly. Otherwise it will be damaged and will have to be replaced.

- Open the sun shade forward completely.

- Remove the locking pin.

- Press the sun shade forward off the guides on the sunroof frame.

- Remove the sun shade upward from the frame diagonally.

2 Bolt

• 2 Nm

• Retracting spring mounting bolt.

3 Bolt

• 1 Nm

4 Wind Deflector

• The sunroof panel is removed.

- Remove the left and right bolts on the wind deflector.

- Remove the front clips and the wind deflector from the sun shade.

5 Bolt

• 2 Nm

6 Slider

• The sun shade is removed.

• Remove the bolt and remove the slider downward from the shade.

7 Bolt

• 2 Nm

Locking Pin for Sun Shade

• Remove the locking pin before removing the sun shade from the guides.

- Remove bolt - 1 - on the wind deflector - 2 - and remove the locking pin - 3 -.






- Remove the sun shade from the guides towards the front.

Retracting Spring Threaded Connection






- Close the sun shade - 3 - completely toward the rear.

- Remove the bolt - 1 - and carefully let the retracting spring retract into the brake - 2 -.

Cable, Replacing






• Only replace the cables in pairs.

- Remove the glass panel and move the roof into the "closed" position.

- Remove the motor.

- Remove the bolt - 1 - and slide the cable - 3 - back out of the guide.

- Slide the new cables in and tighten the bolt to 4 Nm.