Entry Assistance Release Cable A, Adjusting

Entry Assistance Release Cable A, Adjusting

The following conditions must be met to adjust the entry assistance release cable:

• The upholstery must be removed from the seat and backrest and they must be bolted to each other.

• To adjust the entry assistance function, the backrest must be positioned at the front stop.

• The entry assistance release cable B must be engaged at the backrest and on the seat pan lower frame.

Checking and Correcting






- Press the entry assistance lever - 4 - in the direction of the- arrow - as far as the stop.

1 Backrest
2 Bolts
3 Tab
4 Entry assistance lever
5 Backrest frame

- Check if the self-adjuster - 1 - is locked and if the spring in the self-adjuster responds.






- To check, press the self-adjuster - 1 - together and release it twice.

1 Self adjuster
2 Clips

If the test is successful:

- Engage the clip - 2 - on the self-adjuster - 1 -.






If the test is not successful:

- Replace the release cable and perform the checking and adjusting procedure again.