Backrest With Cover or Storage Compartment Overview

Backrest with Cover or Storage Compartment Overview

• The illustration only shows the structure of the right 2/3 section of the backrest. The structure of the left 1/3 section of the backrest is similar.






1 Trim

• For locking

• Lock cylinder without trim, removing and installing, refer to => [ Lock Trim, without Lock Cylinder ] Lock Trim, Without Lock Cylinder.

• Lock cylinder with trim, removing and installing, refer to => [ Lock Trim, with Lock Cylinder ] Lock Trim, With Lock Cylinder.

2 Headrest Guide

• Removing and installing, refer to => [ Headrest Guide ] Headrest Guide

3 Backrest Shell

4 Outer Bracket

5 Release Cable

• Lock - connector station

6 Inner Bracket

7 Upper Upholstery

• Removing and installing, refer to => [ Backrest with Cover or Storage Compartment, Cushion ] Backrest With Cover or Storage Compartment, Cushion

8 Cushion

• Removing and installing, refer to => [ Cover and Padding, Backrest with Cover or Storage Compartment ] Cover and Padding, Backrest With Cover or Storage Compartment

• Separating cover from upholstery, refer to => [ Backrest with Cover or Storage Compartment, Padding Cover ] Backrest With Cover or Storage Compartment, Padding Cover

9 Clip

• In foam in upholstery

10 Clip

• In foam in upholstery

• Only with fabric covers

11 Cover

• Removing and installing, refer to => [ Cover and Padding, Backrest with Cover or Storage Compartment ] Cover and Padding, Backrest With Cover or Storage Compartment

• Separating cover from upholstery, refer to => [ Backrest with Cover or Storage Compartment, Padding Cover ] Backrest With Cover or Storage Compartment, Padding Cover

12 Cushion Clamp

• Only with leather covers

• For securing cover to upholstery

• Always replace if removed

• Install in same location as before removal

13 Retaining Channel

• Sewn into cover

• For engaging the cover in the backrest shell

14 Molding

• Only on backrest with storage compartment or backrest back cover, 2/3 right side

• Sewn into cover

• For attaching the cover into the storage compartment cut-out or the backrest cover

15 Molding

• Sewn into cover

• For engaging the cover in the backrest shell

16 Plugs

• For securing the cover

• Quantity: 2

17 Lower Upholstery

• Removing and installing, refer to => [ Backrest with Cover or Storage Compartment, Cushion ] Backrest With Cover or Storage Compartment, Cushion