Seat Forward/Back Adjuster Release Cable

Seat Forward/Back Adjuster Release Cable

Special tools, testers and auxiliary items required

• Pop Rivet Pliers (VAS 5072)

• Drill

• 4.0 mm drill bit

• Protective Eyewear

Removing






- Remove the trim on the sill side. Refer to => [ Trim, Sill Side ] Trim, Sill Side.

- Remove the screw.

- Remove the seat forward/back adjustment handle.

- Press the control cable sleeve in the direction of- arrow A - out of the control cable bracket.

- Detach release cable - 1 - for seat forward/back adjustment from the release lever - arrow B -.








Eye injury risk.

• Wear protective eyewear!

- Drill out blind rivets - arrows - with a 4 mm drill and remove the retaining plate - 1 -for the relay socket and wiring harness.

- Release retaining clip - 4 - on the release cable in the direction of - arrow A - and remove the retaining clamp in an upward direction - arrow B -.






- Release retaining spring - 2 - with a narrow screwdriver - 3 -.

- Remove seat rail release lever - 1 - up out of the axis of rotation.

- Remove the seat forward/back adjustment release cable.

Installing

Install in reverse order of removal.

For the correct tightening specifications, refer to => [ Lower Seat Frame and Front Backrest Overview ] Lower Seat Frame and Front Backrest Overview.