Bucket Seat Backrest Padding

Bucket Seat Backrest Padding

Removing






- Remove the backrest cover => [ Bucket Seat Backrest Cover ] Bucket Seat Backrest Cover.

- Tilt the backrest bolster inward - arrow A - and detach backrest bolster inflation adjuster - 1 - at retaining bracket - 3 - of the backrest - arrow B -.

- Expose pneumatic hose - 2 - for backrest bolster inflation adjustment at the backrest shell. Remove adhesive tape - 1 - for this purpose.






- Disconnect the pneumatic hose at Y-Connector - 3 - and expose it on the left side. Remove adhesive tape - 4 - for this purpose.

- Remove the backrest cushion with the backrest bolster inflation adjuster from the backrest shell.

Installing

Install in reverse order of removal.