Internal Padding

Internal Padding

Removing






- Remove the center armrest with the pass-through cover. Refer to => [ Center Armrest with Pass-Through Cover ] Center Armrest With Pass-Through Cover.

- Release the clips - arrows -

- Pull the internal upholstery - 1 - off opposite the center armrest.

- While removing, swing the internal padding upward at the same time. The retaining hooks - 2, 3 and 4 - will disengage from their retainers - 5 and 6 - and out of the opening - 7 -.

- Remove internal padding - 1 - from the center armrest with pass-through cover - 8 -.

Installing

Install in reverse order of removal. Note the following:

- Tilt the internal padding - 1 - down and guide the retaining hooks - 2 -, - 3 - and - 4 - into the tabs - 5 - and - 6 - and the opening - 7 -.

- Press the bottom side of internal padding - 1 - onto the clips - arrows - on the pass-through cover.

- If the internal padding cannot be pressed on, carefully press the clips - arrows - in using a screwdriver until the padding engages in the retainer.