Rear Brake Shield

Rear Brake Shield

Removing

- Raise the vehicle.

- Remove the wheels.

- Remove the rear brake rotor, refer to => [ Rear Brake Rotor ] Rear Brake Rotor.

- Remove the bolts from the brake shield.

- Remove the brake shield.

Installing

- Position the brake shield.

- Install the bolts on the brake shield and tighten them.

- Install the rear brake rotor, refer to => [ Rear Brake Rotor ] Rear Brake Rotor.

- Install the brake hose and electrical wire into the bracket on the stub axle carrier.

• Make sure the brake hose is correctly installed and secured inside the bracket on the stub axle carrier. So that the brake hose does not come out of the bracket on its own.

- Mount the wheels.

- Lower the vehicle.