Front Muffler

Front Muffler

• Either a front exhaust pipe or a front muffler is installed, depending on the version.

Removing

- Remove the noise insulation.

- Remove the nuts - arrows -.














Danger of damaging the decoupling element.

• Decoupling element must not be bent more than 10°.

• Do not load decoupling element on cable.

• Do not damage wire mesh at decoupling element.

- Loosen the threaded connections - arrows -, slide the clamping sleeve to the rear and remove the front exhaust pipe/front muffler.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Muffler Overview ] Muffler Overview.

• Replace seals and self-locking nuts.

- Install exhaust system free of stress, refer to => [ Exhaust System, Aligning ] Exhaust System, Aligning.

- Install the noise insulation.