Halogen Headlamps Assembly Overview, From 11.08

Halogen Headlamps Assembly Overview, from 11.08






1 Headlamp Housing

• Removing and installing, refer to => [ Headlamp Housing ] Headlamp Housing

2 Screw

• 4.5 Nm

3 Front Turn Signal Lamp

• Left front turn signal lamp (M5)

• Right front turn signal lamp (M7)

• 12V, 24 W

• Bulb, Replacing => [ Front Turn Signal Lamp Bulbs ] Front Turn Signal Lamp Bulbs

4 Housing Cover

• For the front turn signal and high beam/daytime running lamp

5 High Beam Headlamp/Daytime Running Lamp Bulb

• Left high beam headlamp (M30)

• Right high beam headlamp (M32)

• Left daytime running lamp (L174)

• Right daytime running lamp (L175)

• 12 V, 15/55 W (H15)

• Bulb, Replacing, refer to => [ Low Beam Headlamp or Daytime Running Lamp Bulbs ] Low Beam Headlamp or Daytime Running Lamp Bulbs

6 Screw

• 4.5 Nm

7 Screw

• 4.5 Nm

8 Headlamp Housing Bracket

9 Speed Nut

10 Adjustment Screw

• For Headlamp height adjustment

11 Housing Cover

• For the low beam headlamp/parking lamp/side marker lamp

12 Headlamp Range Control Positioning Motor

• Left headlamp beam adjustment motor (V48)

• Right headlamp beam adjustment motor (V49)

• Not for USA vehicles

• Removing and installing, refer to => [ Headlamp Beam Adjustment Motors ] Headlamp Beam Adjustment Motors

13 Low Beam Headlamp Bulb

• Left low beam headlamp (M29)

• Right low beam headlamp (M31)

• 12 V, 55 W (H7)

• Bulb, Replacing, refer to => [ Low Beam Headlamps ] Low Beam Headlamps

14 Lamp Socket

• For the parking lamp/front side marker lamp bulb

15 Parking Lamp/Front Side Marker Lamp Bulb

• Left parking lamp (M1)

• Right parking lamp (M3)

• Left front side marker lamp (M33)

• Right front side marker lamp (M34)

• 12V, 5 W

• Bulb, Replacing, refer to => [ Parking Lamp or Side Marker Lamp Bulbs ] Parking Lamp or Side Marker Lamp Bulbs

Tightening specification, headlamp housing repair set





- Tighten the screws - 1 - and - 3 - to 6 Nm.