Headlamp Adjuster

Headlamp Adjuster

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing





- Remove the driver side instrument panel cover.

- Remove the bolts - arrows - and the light switch trim - 1 -.

- Disconnect the light switch (E1) electrical connector.

• The illustration shows the light switch removed.

- Disconnect the electrical connector - 1 - on the fog lamp button (E102) by pressing the release button.





- Carefully release retaining hooks - arrows - using a small screwdriver.

- Remove the headlamp adjuster (E102) - item 2 - from the light switch trim.

Installing

Install in reverse order of removal, observing the following:

- Install the light switch trim.

- Install the driver side instrument panel cover.