Front Suspension

Fastener Tightening Specifications










• 1 Always replace after removal.

• 2 Tightening sequence or procedure for tightening the subframe, refer to => [ Subframe Bolting Procedure ] Subframe.

• 3 Must be tightened in the curb weight position, refer to => [ Wheel Bearing with Coil Spring, Lifting to Curb Weight Position ] Front Suspension.

• 4 Pre-tighten to 5 Nm.

• 5 Follow tightening sequence. Refer to => [ Installed Position and Tightening Sequence ] Diagonal Brace, Cabriolet.

• 6 Follow tightening sequence. Refer to => [ Install and tighten the bolts, on after the other, in the following sequence. ] Suspension Strut With Mounting Bracket.