Gearshift Rails and Selector Forks

Gearshift Rails and Selector Forks

• Gearshift rails / shift forks installed positions inside the transmission.

• Removing the shift fork group from the bearing brackets for the input and output shafts. Refer to => [ Shift Fork Group, Input Shaft, 1st, 2nd and Reverse Gear Output Shafts Assembly Overview ] Shift Fork Group, Input Shaft, 1st, 2nd and Reverse Gear Output Shafts Assembly Overview.





1 Gearshift Rail / Reverse Gear Shift Fork

2 Gearshift Rail / Shift Fork for 1st and 2nd Gear

3 Ball Sleeve

• Remove and install, for example, using locking ring pliers (for the outer races) from the gearshift rail / shift fork

4 Gearshift Rail / Shift Fork for 3rd and 4th Gear

5 Gearshift Rail / Shift Fork for 5th and 6th Gear

• With yoke for the gearshift rail / shift fork mounting

• The shift fork cannot be separated from the yoke.

Gearshift Rails / Shift Forks Installed Positions Inside the Transmission.





1. Gearshift rail / reverse gear shift fork

2. Gearshift rail / shift fork for 1st and 2nd gear

3. Gearshift rail / shift fork for 3rd and 4th gear

4. Gearshift rail / shift fork for 5th and 6th gear