Final Drive, Differential (0BKA Automatic Transmission)

Center Differential Housing Overview


There is a risk of damaging the transmission.

• Do not start or tow the vehicle when the center differential is removed or when the gear oil has been drained.






1 Bolt

• Replace

• 20 Nm plus an additional 90° turn

2 Bolt

• Replace

• Tightening sequence and tightening specification

3 Center Differential Housing

• Refer to => [ Center Differential Housing, Transmission Installed ] Center Differential Housing, Transmission Installed

4 O-ring

• Replace

• Coat with transmission fluid

5 Center Differential

6 Ball Bearing

• For the center differential

• Refer to => [ Center Differential Ball Bearing ] Final Drive, Differential (0BKA Automatic Transmission)

7 Locking Ring

• For the ball bearing on the transmission output shaft with splines

8 Locking Ring

• For the transmission output shaft with splines

9 Ball Bearing

• For the transmission output shaft with splines

• Refer to => [ Ball Bearing, Transmission Output Shaft with Splines ] Ball Bearing, Transmission Output Shaft With Splines

10 Balance Weight

• Installed depending on the version

11 Shaft Seal

• For the transmission output shaft with splines

• Refer to => [ Transmission Output Shaft with Splines, Vehicles without Vibration Damper ] Transmission Output Shaft With Splines, Vehicles Without Vibration Damper

• Refer to => [ Transmission Output Shaft with Splines, Vehicles with Vibration Damper ] Transmission Output Shaft With Splines, Vehicles With Vibration Damper

12 Transmission Output Shaft with Splines

• Without vibration damper

• Allocation, refer to the electronic parts catalog ETKA

• Refer to => [ Transmission Output Shaft with Splines ] Transmission Output Shaft With Splines

• Replace the shaft seal when replacing the transmission output shaft with splines

13 Dust Ring

• Replace

14 Transmission Output Shaft with Splines

• With vibration damper

• Allocation, refer to the electronic parts catalog ETKA

• => [ Transmission Output Shaft with Splines ] Transmission Output Shaft With Splines

• Replace the shaft seal when replacing the transmission output shaft with splines

Center Differential Housing - Tightening Specification and Sequence

• Replace the bolts for the center differential housing.

- Tighten the bolts in three steps in the sequence shown: