Center Differential and Center Differential Housing Overview

Center Differential and Center Differential Housing Overview

The center differential housing can be removed and installed with the transmission installed. Refer to => [ Center Differential, Transmission Installed ] Center Differential, Transmission Installed.





1 Center Differential Housing

• With or without vibration dampener, depending on version

• Removing and Installing with transmission installed => [ Center Differential, Transmission Installed ] Center Differential, Transmission Installed

• Replacing the shaft seal, refer to => [ Rear Flange Shaft Seal, Replacing ] Rear Flange Shaft Seal, Replacing

2 Bolt

• 10 Nm + 90° additional turn

• Aluminum bolts (M8; 35 mm long)

• Quantity: 9 or 11

• Always replace

3 Bolt

Steel bolts (38 mm long possible with M8 threaded pin)

• 15 Nm + 90° additional turn

Aluminum bolts

• 10 Nm + 90° additional turn

• Quantity: 2

• Always replace.

4 Bolt

• 15 Nm + 90° additional turn

• Steel bolts (M8; 55 mm long)

• Quantity: 2

• Always replace.

5 Pressure Spring

6 Plate Spring

• Installed position: The camber on the inner diameter faces toward the flange shaft

7 Adjusting Ring

8 Center Differential

• Servicing only by the manufacturer

• Removing and Installing with transmission installed, refer to => [ Center Differential, Transmission Installed ] Center Differential, Transmission Installed

9 Adjusting Ring

• For positioning the center differential

10 Spacer Sleeve

11 Gear Carrier

• Pay attention to the installed position to the transmission cover => [ Center Differential Housing, Installing ] Center Differential, Transmission Installed

12 Spur Gear

• Side shaft/pinion drive wheel

13 Transmission Cover / Transmission