Windshield Washer Fluid Reservoir, Washer Fluid Lines and Nozzle Assembly Overview

Windshield Washer Fluid Reservoir, Washer Fluid Lines and Nozzle Assembly Overview






1 Screw

• Tightening sequence

2 O-Ring

• Replace if damaged

3 Sealing Grommet

• Replace if damaged

4 Fuel Filler Tube

• For washer fluid reservoir

• Removing and installing, refer to => [ Windshield Washer Fluid Reservoir Filler Neck ] Windshield Washer Fluid Reservoir Filler Neck

5 Support Ring

6 Nut

• Threaded connection shared with tower brace

7 Cover

• for the filler neck

8 Washer Fluid Line

• For windshield washer system

9 Right Washer Nozzle

• Depending on equipment, with Right Washer Nozzle Heater (Z21)

• Removing and installing, refer to => [ Windshield Washer Spray Nozzles ] Windshield Washer Spray Nozzles

• Adjusting => [ Windshield Washer Spray Nozzles, Adjusting ] Adjustments

10 Left Washer Nozzle

• Depending on equipment, with Left Washer Nozzle Heater (Z20)

• Removing and installing, refer to => [ Windshield Washer Spray Nozzles ] Windshield Washer Spray Nozzles

• Adjusting, refer to => [ Windshield Washer Spray Nozzles, Adjusting ] Adjustments

11 Washer Fluid Reservoir

• Removing and installing, refer to => [ Windshield Washer Fluid Reservoir ] Windshield Washer Fluid Reservoir

12 Headlamp washer system pump (V11)

13 Sealing Grommet

14 Washer Fluid Line

• For headlamp washer system

15 Retaining Ring

• For Windshield Washer Pump (V5)

16 Windshield Washer Pump (V5)

• Removing and installing, refer to => [ Windshield Washer Pump ] Windshield Washer Pump

17 Sealing Grommet

18 Screw

• Tightening sequence

19 Sealing Grommet

20 Windshield Washer Fluid Level Sensor (G33)

• Removing and installing, refer to => [ Windshield Washer Fluid Level Sensor ] Service and Repair

Washer fluid reservoir, tightening specifications and sequence





- Tighten the washer fluid bolts in the sequence specified:

- Tighten the bolt - 3 - to 7 Nm.

- Tighten the bolt - 4 - to 7 Nm.