Induction Coil of Anti-Theft Immobilizer (D2)

Induction Coil Of Anti-Theft Immobilizer (D2)

Removing






- Remove information electronics control module 1 (J794).

- Release the tabs - arrows - and remove the anti-theft immobilizer reader coil - 1 - from the mount.

- Disconnect the electrical connector - 2 -.

Installing

• Tightening specification, refer to=> [ Steering Column Switch Module and Electronic Ignition Lock Overview ] Service and Repair.

Install in reverse order of removal. Note the following:

- Install information electronics control module 1.