Diagram 5/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Left front exterior door handle touch sensor, Driver door control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G605 - Left front exterior door handle touch sensor Keyless Entry System (front)

J386 - Driver door control module Control Modules in Rear Part Of Vehicle Locations

ST2 - Fuse panel 2

SB4 - Fuse 4 (on fuse panel B) Overview Of Fuses

SB12 - Fuse 12 (on fuse panel B) Overview Of Fuses

T2hc - Double connector

T20e - 20-pin connector Driver's Door Control Module -J386-

T27a - 27-pin connector, in the left A-pillar

(34) - Ground connection under driver seat

(35) - Ground connection under front passenger seat

(205) - Ground connection (in driver door wiring harness)

(371) - Ground connection 6 (in main wiring harness)

* - Refer to applicable wiring diagram for fuse positions

*2 - Only for right-hand drive vehicles

*3 - Data bus wire (CAN bus)

Next Diagram 5/3 (Tracks 15-28)