Diagram 5/9 (Tracks 99-112)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Lane change assistance button, Driver door control module, Lane change assistance warning lamp in driver exterior rearview mirror





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E530 - Lane change assistance button Lane Assist System

J386 - Driver door control module Control Modules in Rear Part Of Vehicle Locations

J519 - Vehicle electrical system control module Control Modules in Front Part Of Vehicle

J769 - Lane change assistance control module Control Modules in Rear Part Of Vehicle Lane Assist System

K232 - Lane change assistance indicator lamp

K233 - Lane change assistance warning lamp in driver exterior rearview mirror

L156 - Switch illumination bulb

T2et - Double connector, in the driver door

T2ev - Double connector

T6ag - 6-pin connector

T12t - 12-pin connector Lane Change Assistance Control Module -J769-

T16c - 16-pin connector Vehicle Electrical System Control Module -J519-

T16l - 16-pin connector Driver's Door Control Module -J386-

T27a - 27-pin connector, in the left A-pillar

T32a - 32-pin connector Vehicle Electrical System Control Module -J519-

Y20 - Driver automatic dimming exterior rearview mirror

(B731) - Connection 1 (58s) (in main wiring harness)

* - Only for vehicles with automatic dimming exterior rearview mirror

Previous Diagram 5/8 (Tracks 85-98)

Next Diagram 5/10 (Tracks 113-126)