Bumper Cover Overview
Bumper Cover Overview
On vehicles with distance regulation (ACC), note the following.
• If the bumper is removed and installed or changes are made to the ACC bracket, distance regulation adjustment must be carried out.
Note the following on vehicles with an Night vision system camera (R212).
• If the bumper was removed and then installed again, or if changes were made to the radiator grille, then it is necessary to calibrate the Night vision system camera.
Bumper Cover, Impact Absorber, Bumper Cover Mount
1 Bumper Cover
• Removing and installing, refer to => [ Front Bumper Cover ] Front Bumper Cover.
2 Bolt
• 4 Nm
• Quantity: 2
3 Mount
• For the infrared camera (R212)
• Removing and installing, refer to => [ Night Vision Camera (R212) Mount ] Night Vision Camera (R212) Mount.
4 Bolt
• 6 Nm
• Quantity: 4
5 Impact Absorber
• Removing and installing, refer to => [ Impact Absorber ] Impact Absorber.
6 Clip
• Quantity: 2
7 Front Parking Aid Sensor
8 Front Bumper Cover Mount
• Removing and installing, refer to => [ Front Bumper Cover Mount ] Front Bumper Cover Mount.
9 Bolt
• 4 Nm
• Quantity: 2
10 Parallel Parking Assistance Front Sensor
11 Bolt
• 4 Nm
12 Bolt
• 1.5 Nm
13 Bolt
14 Distance Regulation Control Module (ACC)
15 Spray Nozzle Cover
• For the headlamp washer system.
• Removing and installing, refer to => [ Headlamp Washer System Spray Nozzle Cover ] Headlamp Washer System Spray Nozzle Cover.
Lock Carrier Cover, Air Intake Grille, End Plate
1 Spoiler Lip
• Removing and installing, refer to => [ Spoiler Lip ] Spoiler Lip.
2 Bolt
• 1.5 Nm
• Quantity: 5
3 Bumper Cover End Plate
• Removing and installing, refer to => [ Front Bumper Cover End Plate ] Front Bumper Cover End Plate.
4 Lock Carrier Cover
• Removing and installing, refer to => [ Lock Carrier Cover ] Lock Carrier Cover.
5 Expanding Clip
6 Expanding Clip
7 Air Intake Grille
• Removing and installing, refer to => [ Air Intake Grille ] Air Intake Grille.
8 Bolt
• 2.1 Nm
• Quantity: 2
9 Bolt
• 5 Nm
• Quantity: 4