Front Bumper Cover, Adjusting

Front Bumper Cover, Adjusting

Procedure






• Gap dimensions, refer to => [ Front Bumper Cover Gap Dimensions ] Front Bumper Cover Gap Dimensions.

• Tightening specifications, refer to => [ Bumper Cover Overview ] Bumper Cover Overview.

- Remove the lock carrier cover. Refer to => [ Lock Carrier Cover ] Lock Carrier Cover.

Height adjustment

- Remove the bolt - 2 - and adjust the height via the adjustor using an hex socket wrench - 1 -.

- Tighten the bolt.

- Check the gap dimension and repeat the adjustment if necessary.

Longitudinal setting

- Loosen the bolt - 3 -.

- Adjust the front bumper cover in the longitudinal direction.

- Tighten the bolts.

- Check the gap dimension and repeat the adjustment if necessary.