Impact Member Mount

Impact Member Mount

Removing






- Remove the side impact bar. Refer to => [ Impact Member ] Impact Member.

- Remove the lock carrier. Refer to => [ Lock Carrier ] Lock Carrier.

- Remove the connecting brace. Refer to => [ Connecting Brace ] Connecting Brace.

- Remove the bolts - arrows -.

- Remove the impact member mount - 2 - from the lock carrier - 1 -.

Installing

• For the correct tightening specifications, refer to => [ Impact Bar Overview ] Impact Bar Overview.

Install in reverse order of removal. Note the following:

- Install the horn bracket.

- Install the connecting brace. Refer to => [ Connecting Brace ] Connecting Brace.

- Install lock carrier. Refer to => [ Lock Carrier ] Lock Carrier.