Lock Carrier Cover

Lock Carrier Cover

Special tools, testers and auxiliary items required

• Pry Lever (80 - 200)

Removing






- Remove the expanding rivets - 1 - with (80 - 200).

- Remove the lock carrier cover - 3 - from the groove in the lock carrier - 2 - - arrow -.

- Move the lock carrier cover forward and remove it.

• While doing this, the tabs - 6 - on the radiator grille - 5 - will detach from the bumper cover - 4 -.

Installing

Install in reverse order of removal. Note the following:

- Slide the lock carrier cover into the groove in the lock carrier cover and then push it onto the radiator grille and bumper cover.