Impact Member, Without Trailer Hitch

Impact Member, Without Trailer Hitch

Removing






- Remove the rear bumper cover. Refer to => [ Bumper Cover ] Bumper Cover.

- Remove the spare wheel well trim, if equipped..

- Remove the nut - 2 - and bolts - 1, 4 and 5 -.

- Remove the impact bar - 3 -.

Installing

• For the correct tightening specifications, refer to => [ Impact Bar Assembly Overview ] Impact Bar Assembly Overview.

Install in reverse order of removal. Note the following:

- Install the spare wheel well trim..

- Install the rear bumper cover. Refer to => [ Bumper Cover ] Bumper Cover.