Screen Separator Mount

Screen Separator Mount

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Remove the cover - 1 - for the rear lifting eye on the corners with the trim removal wedge (3409) from the lifting eye - arrows -.

- Unhook the front lifting eye cover at the mount and remove it.

- Remove the headliner and lay it on the seats. It is not necessary to remove it from the vehicle. Refer to => [ Headliner ] Headliner.






- Press the cap - 2 - toward the rear and remove the bolt - 3 - that is situated behind it. Then remove the screen separator mount - 1 -.

Installation






• Follow all safety precautions when working on pyrotechnic components. Refer to => [ Restraint System Components, Safety Precautions and Testing Procedures ] Description and Operation.

• When installing the front lifting eye - 2 -, do not pinch the head curtain airbag - 1 -.

Install in reverse order of removal. Note the following:

- Press the head curtain airbag - 1 - under the screen separator mount - 2 - as shown in the illustration.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Screen Separator Wall Assembly Overview ] Screen Separator Wall Assembly Overview.