Towing Recognition Control Module (J345)

Towing Recognition Control Module (J345)

- If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or "Guided Functions" using the Vehicle Diagnostic Tester.

Removing






- Remove the luggage compartment right side trim panel cover..

- Disconnect the connectors - 2, 3 and 4 -.

- Release the tab - arrow - and remove the towing recognition control module - 1 - from the upper frame.

Installing

Install in reverse order of removal. Note the following:

- Install the cover for the right luggage compartment side trim panel..