Rear Vents

Rear Vents

Special tools, testers and auxiliary items required

• Hook (T40207)

Removing






• The vent has a hole on both sides for attaching the hook (T40207).

- Carefully insert the hook (T40207) between the slats and hook it to the side of the vent.

- Alternating between the sides, carefully remove the vent - 1 - from the installation opening - arrow -.

- Disconnect electrical connectors.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Front Center Console Assembly Overview ] Front Center Console Assembly Overview.