Knee Airbag Mount

Knee Airbag Mount

Removing






- Remove the glove compartment. Refer to => [ Glove Compartment with Knee Airbags ] Glove Compartment With Knee Airbags.

- Remove the right instrument panel vent air duct - front passenger side on the central tube for the instrument panel.

- Unclip the wire holder - 4 - from the bracket.

- Remove the bolt - 3 - from the bracket on the instrument panel central tube.

- Remove the bracket - 1 - and rubber grommet - 2 -.

Installation

Install in reverse order of removal. Note the following:

- Position the bracket - 1 - with the rubber grommet - 2 - so that the tab engages in the hole inside the instrument panel.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Instrument Panel Central Tube Assembly Overview ] Instrument Panel Central Tube Assembly Overview.