Driver Side Instrument Panel Vent

Driver Side Instrument Panel Vent

Special tools, testers and auxiliary items required

• Hook (T40207)

Removing

- Remove the instrument panel gap cover. Refer to => [ Instrument Panel Gap Cover ] Instrument Panel Gap Cover.

- Remove the instrument cluster gap cover. Refer to => [ Instrument Cluster Gap Cover ] Instrument Cluster Gap Cover.

- Removing the trim for the instrument panel. Refer to => [ Instrument Panel Trim, Driver Side ] Instrument Panel Trim, Driver Side.

- Remove the instrument panel vent cover. Refer to => [ Instrument Panel Vent Cover ] Instrument Panel Vent Cover.

- Remove the light switch (E1).

- Remove the screw - 2 -.






• The vent has a hole on both sides for attaching the hook (T40207).

- Carefully insert the hook (T40207) between the slats and hook it to the side of the vent.

- Remove the vents - 1 - on both sides alternating from side to side - arrows -.

- Reach through the opening for the light switch, disconnect the connector and remove the instrument panel vent.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Instrument Panel Assembly Overview ] Instrument Panel Assembly Overview.