Glove Compartment Lid

Glove Compartment Lid

Removing






- Remove the glove compartment:

• => [ Glove Compartment without Knee Airbags ] Glove Compartment Without Knee Airbags.

• => [ Glove Compartment with Knee Airbags ] Glove Compartment With Knee Airbags.

- Remove the hinge pin from the brake component => [ Glove Compartment Cover Brake Component ] Glove Compartment Cover Brake Component.

- Set the glove compartment down with the top side on a soft surface.

- Drive the left and right hinge pins out using a 4 mm hex socket wrench - 1 - (or another suitable tool) - arrow -.

- Remove glove compartment cover - 2 - from the glove compartment.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Glove Compartment Assembly Overview ] Glove Compartment Assembly Overview.