Mirror Adjusting Unit Mount

Mirror Adjusting Unit Mount

Removing






- Remove the door trim..

- Remove the window frame trim..

- Remove the clip - 2 - and disconnect the connector - 1 -.

- Disconnect electrical harness connector - 7 -.

- Remove the plugs - 5 and 6 -.

- Remove the bolts - arrows -.

- Remove the mirror adjusting unit mount while guiding the grommet - 4 - and the wiring harness - 3 - out through the body opening.

Installing

• For the correct tightening specifications, refer to => [ Exterior Mirror Overview ] Exterior Mirror Overview.

Install in reverse order of removal. Note the following:

- Install the window frame trim..