Inner Mounting Pin

Inner Mounting Pin

Removing






- Remove the rear seat backrest. Refer to => [ Rear Seat Backrest ] Rear Seat Backrest.

- Remove the chafe protection - 4 - and then remove the mounting pin - 3 - from the rear seat backrest frame - 1 -.

• The cushion and cover are not shown in the illustration.

- Remove the bearing sleeve - 2 - from the mounting pin.

Installation

Install in reverse order of removal. Note the following:

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Split Rear Seat Backrest Assembly Overview ] Split Rear Seat Backrest Assembly Overview.