Lock Trim For Locking Mechanism Without Lock Cylinder - Avant

Lock Trim for Locking Mechanism without Lock Cylinder - Avant

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Unlock the rear seat backrest.

- Make sure the button - 2 - (indicator) is in the up position.

- Push the tabs - arrows - on both sides of the trim using a trim removal wedge (3409).

- Remove the trim - 1 - upward and off the rear seat backrest - 3 -.

- Remove the trim - 1 - as far as possible upward from the rear seat backrest.






- Pry the catch - arrow - out of the locking mechanism using a flat blade screwdriver.

- Remove the trim upward from the rear seat backrest.

Installation

Install in reverse order of removal. Note the following:

- Make sure the button moves easily after installing the trim.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Locking Mechanism and Backrest Release Assembly Overview - Avant ] Locking Mechanism and Backrest Release Assembly Overview - Avant.