Outer Bearing Sleeve

Outer Bearing Sleeve

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Remove the rear seat backrest. Refer to => [ Rear Seat Backrest ] Rear Seat Backrest.

- Remove the bearing sleeve - 2 - from the rear seat backrest - 1 - using a trim removal wedge (3409).

Be careful not to damage the backrest cover when removing the bearing sleeve.

Installation

Install in reverse order of removal. Note the following:

- Make sure all tabs - arrow - engage completely in the mount - 3 - on the rear seat backrest - 1 -.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Split Rear Seat Backrest Assembly Overview ] Split Rear Seat Backrest Assembly Overview.