Rear Seat Backrest Locking Mechanism Assembly Overview - Sedan

Rear Seat Backrest Locking Mechanism Assembly Overview - Sedan

• The assembly overview refers to the latching device for the left 1/3 rear seat backrest. Latching is similar for the right 2/3 rear seat backrest.






1 Rear seat backrest frame

2 Key

3 Lock cylinder

• Removing and Installing, refer to => [ Locking Mechanism Lock Cylinder - Sedan ] Locking Mechanism Lock Cylinder - Sedan

• Only remove and install the lock cylinder with the key inserted correctly. If that is not done, the tumblers and compression springs can fall out and the lock cylinder will be ruined.

• Check the installation position when installing the lock cylinder. It is not possible to lock the backrest correctly if the installation position is not correct.

4 Protective cap

• For lock cylinder

• Remove before installing the lock cylinder

The key must be inserted in the lock cylinder correctly before the protective cap is removed. If that is not done, the tumblers and compression springs can fall out and the lock will be ruined.

5 Trim

• For locking and lock cylinder

• Removing and Installing, refer to => [ Lock Trim for Locking Mechanism with Lock Cylinder - Sedan ] Lock Trim For Locking Mechanism With Lock Cylinder - Sedan

• Press on until it engages audibly

6 Locking tab

• For the rear seat backrest

• Removing and Installing, refer to => [ Rear Seat Backrest Locking Mechanism ] Rear Seat Backrest Locking Mechanism

7 Bolt

• Quantity: 2

• 25 Nm