Release Cable From Locking Mechanism to Coupling Station - Avant

Release Cable from Locking Mechanism to Coupling Station - Avant

• The procedure for removing and installing the release cable is described on the left lock to the connector station.

• The connector station lock release cable can only be replaced with the cover and cushion removed.

Removing






- Remove rear seat bench. Refer to => [ Rear Bench Seat ] Rear Bench Seat.

- Remove the rear seat backrest. Refer to => [ Rear Seat Backrest ] Rear Seat Backrest.

- Remove the headrest. Refer to => [ Rear Headrest ] Rear Headrest.

- Remove the upholstery on the rear seat backrest around the locking mechanism. Refer to => [ Foldable Backrest Cover with Split Rear Seat Backrest Cushion ] Foldable Backrest Cover With Split Rear Seat Backrest Cushion.

- Remove the bracket - 5 - for the release cable on the rear seat backrest.

- Remove the release cable - 1 - from the locking mechanism - 2 - - arrow A -.

- Remove the release cable nipple - 4 - from the release handle - 3 - - arrow B - and remove the release cable.

Installation

Install in reverse order of removal.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Locking Mechanism and Backrest Release Assembly Overview - Avant ] Locking Mechanism and Backrest Release Assembly Overview - Avant.