Safety Ground Lock

Safety Ground Lock

Removing






- Move the front seat all the way forward/up.

- Remove the bolts - 1 -.

- Detach retaining plate - 2 - on the seat pan lower frame - arrow - and remove.








Risk of damage to the bushing in the bearing point (safety ground lock).

• The bushing cannot be replaced with workshop materials.

• If a bushing is damaged, the assembly part must be replaced.

- Remove safety ground lock - 1 - from the mounting pin on the seat pan lower frame - 2 -.

Installation

Install in reverse order of removal. Note the following:

- Check if the spring is installed in the retaining plate.

- Install safety ground lock and secure with the retaining plate.

- Check safety ground lock for ease of movement. Refer to => [ Checking Safety Ground Lock for Ease of Movement ] Checking Safety Ground Lock For Ease of Movement.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Safety Ground Lock Assembly Overview ] Safety Ground Lock Assembly Overview.