Seat Angle Adjustment Handle, Sport Seat

Seat Angle Adjustment Handle, Sport Seat

• Removal and installation can be performed with the front seat installed.

Removing






- Remove the trim on the sill side. Refer to => [ Sill Side Trim ] Sill Side Trim.

- Pry the handle - 2 - off the seat angle adjustment - 1 - by using a screwdriver to press down the clip locking spring.

Installation






Install in reverse order of removal. Note the following:

- Replace the clip on the seat angle adjuster lever. Pay attention to the installed position.

- Make sure the seat height adjustment handle engages correctly with the clip.

• The springs - arrows - (quantity: 2) on the clip - 2 - must be on the inner side of the lever - 1 -.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Seat Forward/Back Adjustment Assembly Overview, Sport Seat ] Seat Forward/Back Adjustment Assembly Overview, Sport Seat.