Seat Heating Elements Z6/Z8 - Manual or Power Standard Seat

Seat Heating Elements Z6/Z8 - Manual or Power Standard Seat

Includes Driver seat heating element (Z6) / front passenger seat heating element (Z8)

Removing






- Separate the seat cover from the seat cushion. Refer to => [ Seat Cover and Seat Cushion - Standard Seat, Separating and Connecting ] Seat Cover and Seat Cushion - Standard Seat, Separating and Connecting.

- Disconnect the electric wire - 2 - directly from the old heating element - 1 -.

• The old heating elements remain on the cushion and will be covered over by the new heating element.

Installation

- Align the new heating elements on the seat cushion.

- Remove protective films from the heating elements in succession, taking care not to damage the heating elements.

- Bond heating elements in the sequence - B, C, D and A - so that they align with the old heating elements and are wrinkle free.

- Route the connecting wires to the individual heating elements in the base of the gaps.

Further installation is performed in the reverse order of removal.

Information for installation: for example tightening specifications, replacing body parts, refer to => [ Seat Heating and Backrest Heating Assembly Overview - Standard Seat/Sport Seat ] Seat Heating and Backrest Heating Assembly Overview - Standard Seat/Sport Seat.